Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D10x15
  • Rig Size:
    0 - 10,000 lbs Pullback

View Manufacturers View Models

Specifications

Pump Output 13.5 gpm
Joint Diameter 42 mm
Weight 17 kg
Pipe Diameter 1.66” 4 cm
Length 15' 8'' 478 cm
Width 35.5'' 91cm
Entry Angle 16 degrees
Drill Stem 10' 0'' 3m
Pullback 10000 lbs 4535.9 kg
Max Carriage Speed 90 ft/min 27.4 m/min
Max Spindle Speed 180 rpm 180 rpm
Min Bore Diameter 3" 7.6 cm
Manufacturer's Gross HP Rating 50 hp 37.3 kw
Height 86.5'' 219.7 cm
Fluid Tank 55 gal 208.2 L
Max Flow 13.5 gpm 51.1 L/min
Rated Engine RPM 3000 rpm 3000 rpm
Rod Loader yes - optional
Length 10 Ft. 3 m
Max Pressure 750 psi 51.7 bar
Engine Perkins
Ground Drive Speed 1.5 mph 2.4 km/h
Make and Model Perkins
Pump Pressure 750 psi
Rod Carrying Capacity 440'
Hydraulic Tank Capacity 23 gal 87.1 L
Thrust 10000 lbs 4535.9 kg
Fuel Tank Capacity 17 gal 64.4 L
Min Bend Radius 29.1 m
Type Forged
Weight 8980 lbs 4073.3 kg

Additional Info

Oil-well drilling installation
Length: 478 cm
Width: 91 - 124 cm
with linkage change mechanism: 107 - 124 cm
Height (in operating position): 219.7 cm
Operating weight
with linkage box: 3447 kg
with linkage box and
autom. Linkage change-over switch: 3946 kg
hydr. Tightening device: Yes
Driving speed: 2,4 km/h
integrated drill pipes: Yes
autom. Linkage change-over switch: (optionally)
stationary anchoring system: Yes
Work slip thrower: Yes

Operational data
max. Number of revolutions: 180 U/min.
max. Torque: 2031 Nm
effect. Feed motion u. Pull-back power: 4536 kg
electrical. System: 12 V

Suspension system
Option 1:
max. Mechanical handling capacity: 51.10 l/min.
Option 2:
Use of other high pressure suspension plants
possible.

Drive
Engine: Perkins®
Achievement: 50 PS/37 KW
max. Revolutions: 3000 U/min.

Drill pipes
one-piece forged: Yes
Single length: 3 m
Diameter: 42 mm
Bending radius: 29.1 m
Weight: 17 kg

Drilling parameter
min. Hole diameter: 80 mm
The drilling head works with all well-known
Detection systems.
max. Drilling length varies *)
*) Dependent on ground condition,
Hole diameter and weight too
shifting product.

Amount of filling
Hydraulic oil: 87 l
Engine oil inclusive. Filter 8.2 l
Fuel: 64 l

---------------------

DIMENSIONS AND WEIGHTS
Weight: 8980 lbs (4073.3 kg)

ENGINE
Make and Model: Perkins
Maximum Engine RPM: 3000 rpm
Gross Horsepower: 50 hp (37.3 kw)
Net Horsepower: 47 hp (35.1 kw)

OPERATIONAL
Thrust: 10000 lbs (4535.9 kg)
Pullback: 10000 lbs (4535.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 90 ft/min (27.4 m/min)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 3 " (7.6 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes- optional
Drill Rack Angle: 16 deg

FLUID CAPACITIES
Fuel Tank: 17 gal (64.4 L)
Engine Crankcase with Filter: 8.7 qt (8.2 L)
Hydraulic Tank: 23 gal (87.1 L)
Drilling Fluid System Option One
Maximum Flow: 13.5 gpm (51.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 55 gal (208.2 L)

FEATURES
Breakout System: Hydraulic - open top
Stakedown System: Yes - stationary

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x