Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    7610

View Manufacturers View Models

Specifications

Height 96 in
Length 133 in
Width 72 in
Weight 12,000 lb
Engine Deutz F4L912

Additional Info

DIMENSIONS
Angle of approach: 18°
Overhang beyond tire: 1.5 in
Height: 96 in
Length - transport: 133 in
Wheelbase: 72 in
Width: 72 in
Tread: 53.75 in

GENERAL
Ditch Witch model 7610 tractor, 4-wheel drive, rigid frame, ground drive through rubber tires,
conventional two wheel power steering (optional 4-wheel steering) basic riding unit.

OPERATION
Vehicle speeds
Maximum transit forward
1st gear: 2.4 mph
2nd gear: 3.9 mph
3rd gear: 6.7 mph
4th gear: 9.6 mph
Maximum reverse: 2.1 mph
Ground drive speed (high range): 0-64 fpm
Max. operating weight: 12,000 lb
Basic unit weight w/o attachments and backfill
blade with 31 x 15.50 tire and 175 lb operator: 5,800 lb

BACKFILL BLADE
Standard: 6-way hydraulic lift angle and tilt
Blade width: 72 in
Blade height: 15 in
Lift height above ground (standard tires): 18 in
Blade drop below ground (standard tires): 12 in
Maximum swing angle (left/right): 30°
Tilt angle (up/down): 22°

POWER TRAIN
Ground drive:
Transmission (mechanical) - 4 speeds forward, 1 reverse with gear drive to axles
Ground drive (hydraulic) - Hydraulic drive infinitely variable from zero to maximum with 2 speed
ranges through enclosed reduction to axles
Clutch: Automotive spring-loaded foot-operated
friction drive
Service brake: Disc independent fluid-actuated
calipers, foot operated
Parking brake: Disc independent mechanically-actuated calipers, hand operated
Trencher Drive
Transmission - 4speeds, 1 reverse through shock absorbing clutch belt drive
to right angle drive to head shaft
Clutch - Automotive spring-loaded foot operated friction drive

POWER
Engine: Deutz F4L912
Fuel: Diesel
Cooling medium: Air
Number of Cylinders: 4
Displacement: 230 cubic inches
Bore: 3.94 in
Stroke: 4.72 in
Engine manufacturer's gross horsepower rating: 80 hp
Max. governed speed as installed (no load): 2650 rpm
Flywheel power (full load): 74 hp

HYDRAULIC SYSTEM
Pump capacity setting - 2000 psi (13790 kPa) per section
Crowd relief valve setting
Normal: 2250 psi
Normal (M730/M750): 2750 psi
High: 2000 psi
Filtration: Return full flow with bypass valve 10 micron nominal
Hydraulic motor
Torque @ 2200 psi (13790 kPa) & 21.5 gpm (81.4 Lpm): 8600 in-lb
Speed: 190 rpm
Displacement: 30 in3/rev

FLUID CAPACITIES
Fuel tank: 19 gal
Engine oil including filter: 7 qt
Transmission: 3.75 pt
Gear Box: 12.5 qt
Hydraulic system: 19.5 gal
Differential
Rockwell Rigid Rear: 11.5 qt
Rockwell Steerable Front: 11.5 qt
Eaton Steerable Rear: 6.75 qt

BATTERY
Group 34H SAE Res. Cap. 120 min. SAE cold crank @ 0° F (-18°C), 800 amp

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x