Equipment Specifications Library
Basic Model Information
-
Manufacturer:Vermeer
-
Model:D50x100
-
Rig Size:30,001 - 50,000 lbs pullback
View Manufacturers View Models Back to Listing
Specifications
Additional Info
DIMENSIONS
Length: 21' (6.4 m)
Width: 93" (236 cm)
Height: 96" (244 cm)
Weight: 29,200 lbs (13,245 kg) with 270' (82.3m) of 3.5" (8.9 cm) rod
Hydraulic pipe vise: Yes
Transport speed: 2.1 mph (3.4 km/h)
Rod box on rack: Yes - 300' (91.4 m)/2.875" (7.3 cm) rod, 270' (82.3 m)/3.5" (8.9 cm) rod
Automated Rod Loader: Yes
DRILL PIPE
Firestick
One-piece forged design: Yes
Length: 15' (4.6 m)
Diameter: Standard - 3.5" (8.9 cm), Optional - 2.875" (7.3 cm)
Feet of rod/90 degrees: Standard - 310' (94.5 m), Optional - 265' (80.8 m)
Weight: Standard - 230 lbs (104 kg), Optional - 195 lbs (88 kg)
Max Torque: Standard - 10,000 ft-lb (13,560 Nm), Optional - 9,000 ft-lb (12,204 Nm)
OPERATIONAL
Maximum Spindle Speed: 80/106/160 RPM
Maximum Spindle Torque: 10,000 ft-lb (13,560 Nm) @ 80 RPM, 7,600 ft-lb (10,300 Nm) @ 106 RPM, 3,300 ft-lb (4,470 Nm) @ 160 RPM
Actual Thrust/Pullback: 38,000/49,600 lbs (17,237/22,499 kg)
Electrical System: 12 Volt DC
BORE
Minimum bore diameter: 4.5" (11.4 cm)
Drill head works with all well-known Detection systems
Maximum backreamed diameter and bore length varies - Dependent on ground condition.
POWER SOURCE
Engine: Cummins 6BTA5.9
HP: 185 HP
DRILLING FLUID SYSTEM
Maximum Flow: 150 GPM (567 LPM)
Maximum Pressure: 1000 PSI (69 bar)
Length: 21' (6.4 m)
Width: 93" (236 cm)
Height: 96" (244 cm)
Weight: 29,200 lbs (13,245 kg) with 270' (82.3m) of 3.5" (8.9 cm) rod
Hydraulic pipe vise: Yes
Transport speed: 2.1 mph (3.4 km/h)
Rod box on rack: Yes - 300' (91.4 m)/2.875" (7.3 cm) rod, 270' (82.3 m)/3.5" (8.9 cm) rod
Automated Rod Loader: Yes
DRILL PIPE
Firestick
One-piece forged design: Yes
Length: 15' (4.6 m)
Diameter: Standard - 3.5" (8.9 cm), Optional - 2.875" (7.3 cm)
Feet of rod/90 degrees: Standard - 310' (94.5 m), Optional - 265' (80.8 m)
Weight: Standard - 230 lbs (104 kg), Optional - 195 lbs (88 kg)
Max Torque: Standard - 10,000 ft-lb (13,560 Nm), Optional - 9,000 ft-lb (12,204 Nm)
OPERATIONAL
Maximum Spindle Speed: 80/106/160 RPM
Maximum Spindle Torque: 10,000 ft-lb (13,560 Nm) @ 80 RPM, 7,600 ft-lb (10,300 Nm) @ 106 RPM, 3,300 ft-lb (4,470 Nm) @ 160 RPM
Actual Thrust/Pullback: 38,000/49,600 lbs (17,237/22,499 kg)
Electrical System: 12 Volt DC
BORE
Minimum bore diameter: 4.5" (11.4 cm)
Drill head works with all well-known Detection systems
Maximum backreamed diameter and bore length varies - Dependent on ground condition.
POWER SOURCE
Engine: Cummins 6BTA5.9
HP: 185 HP
DRILLING FLUID SYSTEM
Maximum Flow: 150 GPM (567 LPM)
Maximum Pressure: 1000 PSI (69 bar)
This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.